Author Topic: Sony LCD -ve picture (Read 4695 times)

P.R.Gore · « **on:** July 12, 2011,01:23:39 »

In Sony LCD Model No KLV32V400A picture becomes -ve after few minutes. OSD remains always normal.A photo of this defect is attached. Can anybody provide me solution?

Mulja tv repair portal · « **on:** July 12, 2011,01:23:39 »

Keith · « **Reply #1 on:** July 12, 2011,04:11:48 »

Hi,

I have had similar problems with other brands, and it turned out to be the TCON board.

Hope that helps

Keith

Turnip · « **Reply #2 on:** July 12, 2011,12:47:56 »

Hi P.R.G,

if your LVDS is Sharp CPWBN-RUNTK-4024TP - have got one from a screen smash - Chris.

Mulja tv repair portal · « **Reply #2 on:** July 12, 2011,12:47:56 »

P.R.Gore · « **Reply #3 on:** July 13, 2011,06:59:35 »

Thanks Keith & Turnip for ur reply. I shall look for exact type TCON board. Is repairs of TCON bord possible?
Regards
P R G

Turnip · « **Reply #4 on:** July 14, 2011,12:24:53 »

Hi PRG,

Had something similar on a 26 Bush (Vestel) where I took in apart to find part numbers, Tried "Quuq parts required" - got no replies - reassembled set - then found pic OK.

Suspect in my case it was connections - all the best - Chris.

P.R.Gore · « **Reply #5 on:** August 11, 2011,07:39:48 »

Hi,
One of my friends send me Tcon IC on T-Con board, which I replaced. Now original problem is gone, but there is excess brightness on picture. Hence black portion on picture can not be seen black but it becomes whitish -ve.
Any solution?
P R Gore

Mulja tv repair portal · « **Reply #5 on:** August 11, 2011,07:39:48 »

Mulja tv repair portal

News: