Author Topic: Luxor PVR LUX1040B - Vestel  (Read 7263 times)

0 Members and 1 Guest are viewing this topic.

Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Luxor PVR LUX1040B - Vestel
« on: August 28, 2011,12:21:45 »
Hi folks,

Have one of these where machine won't initialise. In the past a replacement hard drive did the job, this time it tries to format it then gives up. Tried some 5 hard drives.

PS  16PW810-2 seems OK with correct voltages and no duff caps, think it's a mainboard prob - 16MB8252-1

Anyone had the problem  ? - Chris.

Mulja tv repair portal

Luxor PVR LUX1040B - Vestel
« on: August 28, 2011,12:21:45 »

brainstorm

  • Hero Member
  • *****
  • Posts: 329
    • Email
Re: Luxor PVR LUX1040B - Vestel
« Reply #1 on: August 31, 2011,08:10:03 »
Hi Chris

Not sure how relevent this is, but, I had the same fault on a Thomson PVR and it was a Cap in the PSU , causing a ripple on one of the supply rails and upsetting the Micro

But, if your rails are smooth then I would think you are looking at a duff main micro

Brian

Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Re: Luxor PVR LUX1040B - Vestel
« Reply #2 on: September 12, 2011,13:09:16 »
Hi Bri and thanks,

Incidentally just had a Thomson PVR with usual secondary caps all bulgy - replaced them then P/S pulsing, but with no readable short - odd one - Chris.

Mulja tv repair portal

Re: Luxor PVR LUX1040B - Vestel
« Reply #2 on: September 12, 2011,13:09:16 »

 

download
download
download
download