Author Topic: Samsung LE40R74BDX  (Read 4736 times)

0 Members and 1 Guest are viewing this topic.

markc

  • Sr. Member
  • ****
  • Posts: 115
    • Email
Samsung LE40R74BDX
« on: September 15, 2011,07:08:42 »
HI,

Have one of these on which freeview is not working only displaying a frozen channel 21.
I am unable to enter the service menu to do a reset.
Does anyone have any other suggestions?
Thanks
Mark

Mulja tv repair portal

Samsung LE40R74BDX
« on: September 15, 2011,07:08:42 »

sparky

  • Hero Member
  • *****
  • Posts: 1223
    • Email
Re: Samsung LE40R74BDX
« Reply #1 on: September 15, 2011,08:44:46 »
hi
replace eeprom ic
dave

markc

  • Sr. Member
  • ****
  • Posts: 115
    • Email
Re: Samsung LE40R74BDX
« Reply #2 on: September 16, 2011,06:18:46 »
Thanks. Do you know the location number?
Mark

Mulja tv repair portal

Re: Samsung LE40R74BDX
« Reply #2 on: September 16, 2011,06:18:46 »

sparky

  • Hero Member
  • *****
  • Posts: 1223
    • Email
Re: Samsung LE40R74BDX
« Reply #3 on: September 17, 2011,04:28:46 »
hi
look back at previous listing more detail fault finding info
just scroll back and read all about the fault
dave

Ohm Supplies

  • Sr. Member
  • ****
  • Posts: 189
    • Email
Re: Samsung LE40R74BDX
« Reply #4 on: September 18, 2011,09:31:27 »
Isn't it on the board marked "eeprom"?

regards
Andy
OHM SUPPLIES

www.ohmsupplies.co.uk

LCD & PLASMA REPAIR KITS DESIGNED
REPAIRS CARRIED OUT IN THE LIVERPOOL AREA

WickfordTV

  • Newbie
  • *
  • Posts: 3
    • Email
Re: Samsung LE40R74BDX
« Reply #5 on: October 27, 2011,08:18:48 »
Take back off and you will find two PCB's under the can
one being digital and the other the main
these are connected Via a multi pin connector this is where your problem lies
Just take out both boards and resolder the pins on pcb (suffers from dry joints)
MAKE sure not to bridge solder on pins 

Mulja tv repair portal

Re: Samsung LE40R74BDX
« Reply #5 on: October 27, 2011,08:18:48 »

 

download
download
download