Author Topic: LG-50PS3000 (Read 5344 times)

g*****s · « **on:** September 26, 2011,15:19:39 »

I have an lg50ps3000 plasma with red green and blue sparkles.Have adjusted the three pots on power supply its better but not right.Any help would be great,Am good at lcd but plasmas im struggling with.

Mulja tv repair portal · « **on:** September 26, 2011,15:19:39 »

dazzler · « **Reply #1 on:** September 27, 2011,07:55:47 »

If you find out, mine has gone the same, haven't touched anything yet, which have you tuned?
found this, but not same brand but same problems
http://www.jopezu.com/plasma.htm

tv tony · « **Reply #2 on:** September 27, 2011,10:26:08 »

Be careful, all you have done is alter the vs, va and the 5v line, these should be adjusted exactly to what the screen requires, the fact it diminishes the mal discharge is irrelevant.Do you want the service manual.The voltages required are on a label on the screen.
Tony Walker

Mulja tv repair portal · « **Reply #2 on:** September 27, 2011,10:26:08 »

g*****s · « **Reply #3 on:** September 27, 2011,13:34:20 »

Have seen somewhere,how to measure to set correct voltages,but could not remember measuring points.Boss made me adjust by sight becouse he had someone for it.its now gone but i prefer to try and do things right.So any help for a future one would be great.

brainstorm · « **Reply #4 on:** September 28, 2011,08:03:09 »

Hi

LG did a Mal discharge Jig for some models, but I'm not sure if it applies to this model

Brian

Mulja tv repair portal · « **Reply #4 on:** September 28, 2011,08:03:09 »

Mulja tv repair portal

News: