Author Topic: wharfedale dtv fault. (Read 5233 times)

dougc · « **on:** October 07, 2011,06:08:22 »

Hi all, Has anyone come across this one (see picture) It is only on dtv, analogue and all other inputs are fine. Cheers, Doug.

Mulja tv repair portal · « **on:** October 07, 2011,06:08:22 »

brainstorm · « **Reply #1 on:** October 07, 2011,06:50:30 »

Hi

Are you saying that the set is displaying colour bars on dtv?

Brian

dougc · « **Reply #2 on:** October 07, 2011,07:28:23 »

Yes, but only on dtv.

Mulja tv repair portal · « **Reply #2 on:** October 07, 2011,07:28:23 »

brainstorm · « **Reply #3 on:** October 07, 2011,07:36:05 »

Hi Doug

It looks to me like the set is in some kind of 'burn in' mode'

Do you know how to access the service mode and carry out a service reset?

Brian

dougc · « **Reply #4 on:** October 07, 2011,07:44:16 »

I agree, but up to now I haven't found any info on service mode. Doug The set is a Wharfedale l32ta6a>

brainstorm · « **Reply #5 on:** October 07, 2011,08:21:01 »

Hi Doug,

Im not sure which chassis is fitted to this set, but the usual is one is Menu 4 7 2 and 5

Brian

Mulja tv repair portal · « **Reply #5 on:** October 07, 2011,08:21:01 »

daz · « **Reply #6 on:** October 07, 2011,08:43:10 »

hi doug
not sure if this is the same but give it a go
daz

dougc · « **Reply #7 on:** October 07, 2011,09:40:57 »

Hi all, Thanks for your input. I've found service menu (display>p.mode>s.mode>sleep) but can't find any reference to factory reset

dougc · « **Reply #8 on:** October 10, 2011,05:26:09 »

Hi all, Found a dvb panel on internet for a tenner. Problem solved, but I'd still like to know what causes such a 'fault' Doug.

Turnip · « **Reply #9 on:** October 10, 2011,13:21:51 »

Hi Doug,

Don't think you mentioned set model or DVB panel numbers - sounds like an old Vestel - Chris.

ProDave · « **Reply #10 on:** October 11, 2011,06:12:38 »

This sounds to me like the panel is not receiving a signal.

Once, when working on a set I accidentaly powered it up with the lvds connector partly unplugged, and the panel went through a sequence or red, green, blue then colour bars.

watteau · « **Reply #11 on:** October 11, 2011,06:41:37 »

Hi,
Check if this is shown on the service menu:
'E2P INT', this option initialises the EEPROM,
Regards,
John

dougc · « **Reply #12 on:** October 11, 2011,13:08:28 »

Hi John, Yes I tried initialising eeprom - made no difference - Doug,

Mulja tv repair portal · « **Reply #12 on:** October 11, 2011,13:08:28 »

Mulja tv repair portal

News: