Forum > PLASMA TV forum

LG 42PC1DA repaired psu also FS1 blows help please

<< < (2/3) > >>

Tmg:
Thank you Daz
I will check this out
Regards
Tony

daz:
forgot to say, you will have to check all caps on the y + z sus pcb, as they could cause the ic to fail again.

Tmg:
Hello
Can someone advise me the best way to remove the IPM module on the Zsus board I currently have managed to remove heatsink but cannot get IC off from the board.
unless somone has a cheap board  6870QZH004B / 6871QZH056B is fitted

scooby-doo:
I have a board from an LG that looks exactly the same as this but the P/N is EBR61021008...came from a smashed screen LG 42 PQ3000 , if someone can confirm it would work then you can gladly have it FOC to try...as long as you pay postage

Ohm Supplies:
How have you managed to seperate the heatsink from the ic without removing it?

Well done, if at least you didn't mean to do it

regards
ANdy

Navigation

[0] Message Index

[#] Next page

[*] Previous page