Author Topic: PANASONIC plasma TH-42PV500B (Read 4350 times)

chrissie jones · « **on:** November 28, 2011,07:45:32 »

relay goes click.standby lite comes on,then starts flashing 10 to 12 time then clicks again then goes dead......help...

Mulja tv repair portal · « **on:** November 28, 2011,07:45:32 »

brainstorm · « **Reply #1 on:** November 29, 2011,08:27:15 »

Hi
You need to count the blinks, that might tell you the fault area

Brian

chrissie jones · « **Reply #2 on:** November 29, 2011,08:28:46 »

blinking to fast....brian

Mulja tv repair portal · « **Reply #2 on:** November 29, 2011,08:28:46 »

tv tony · « **Reply #3 on:** November 30, 2011,10:16:48 »

now unlocked, hope i did right

brainstorm · « **Reply #4 on:** December 02, 2011,05:14:34 »

Hi

What colour is the flashing LED?
Green or Red?

I suspect you will have to do some voltage checks.
You need to be fairly experienced to take on plasma repairs, they are not for the faint hearted!

Brian

chrissie jones · « **Reply #5 on:** December 02, 2011,06:30:14 »

its red.brainstorm..dont like plasmas....

Mulja tv repair portal · « **Reply #5 on:** December 02, 2011,06:30:14 »

brainstorm · « **Reply #6 on:** December 02, 2011,07:15:21 »

Hi
If its flashing red then they normally flash in a sequence and then there is a pause and then the sequence starts again, try counting again, if you really can't count them, then start by checking all your PSU voltages

You will definitely need a service manual

Brian

Mulja tv repair portal · « **Reply #6 on:** December 02, 2011,07:15:21 »

Mulja tv repair portal

News: