Author Topic: wharfdale l32ta6a (Read 5013 times)

sparky · « **on:** December 08, 2011,12:52:36 »

hi
help if poss how can you over ride unlock cust forgot code
thanks
dave

Mulja tv repair portal · « **on:** December 08, 2011,12:52:36 »

watteau · « **Reply #1 on:** December 09, 2011,11:13:07 »

Hi,
On some models the default password is 0711.
You could also try a reset - DISPLAY (or DIS/INFO), P.MODE, S.MODE, SLEEP,
then use 'E2P INT', to INITIALISE the EEPROM.
Regards
John.

sparky · « **Reply #2 on:** December 09, 2011,13:33:29 »

hi
thanks for reply just tried 0711 still same looks like one for pile
cannot access service menu till unlock
dave

Mulja tv repair portal · « **Reply #2 on:** December 09, 2011,13:33:29 »

tv tony · « **Reply #3 on:** December 10, 2011,06:36:35 »

hiya dave, think this is itMENU, 8, 8, 9, 3
or, handset keys 0,6,2,5,9,6 + 'DISPLAY' key. ( 'FAC' mode menu). Then select “Factory” item.
or, DISPLAY/INFO, P.MODE, S.MODE, SLEEP - USE 'E2P INT', TO INITIALISE THE EEPROM

sparky · « **Reply #4 on:** December 10, 2011,11:06:48 »

hi
thanks for all replys none worked gone to scrap pile
good psu & and inverter & tcon will save screen mainboard
out ot stock everywere made by haier
dave

low.flying.pigs · « **Reply #5 on:** December 21, 2011,09:41:36 »

Had a few similiar issues with different sets. Sometimes if the EEPROM can be located, it can be erased by hardwiring, powering up for a while, then powering down, remove the hardwiring, then powering up again.

Mulja tv repair portal · « **Reply #5 on:** December 21, 2011,09:41:36 »

sparky · « **Reply #6 on:** December 21, 2011,11:59:33 »

hi
thanks for info been sold on screen went to anther engineer
other panels saved including psu made more that way
dave

Mulja tv repair portal · « **Reply #6 on:** December 21, 2011,11:59:33 »

Mulja tv repair portal

News: