Forum > LCD TV forum
Samsung LE40R88BDX/XEU
paulb1970:
*****UPDATE*****
Re-entered all my original setting's and now have analogue & freeview back - for some reason it never stored all the settings when i last done them ...
This is my source list :
TV - Active
Ext.1 - Active
Ext.2 - Active
Av - Not Active
S-Video - Not Active
Component - Not Active
Pc - Not Active
HDMI 1 - Not Active
HDMI 2 - Not Active
HDMI 3 - Not Active
DTV -Active
So now i need to find out how to reactivate them all as need to connect Dvd and Wii ...
Thank's Again ;)
serg604:
it will be much better if somebody who still have working Samsung R86/87/88 with original eprom will make dump of 24c256 chip and put it here, so no need to make any setting manually and panel working time will show something more realistic and not 00000
paulb1970:
Hello serg ,
Thanks for your reply , but i havent got a clue what dumps and panel working time are :(
but im a fast learner - to date ive fixed about 10 plasma/lcd for friends and family ;)
every now and again if i get a decent tv for free i will try and fix it ie : replace caps or board but this 1 ive now got needed eeprom reset and after 30-40 goes reseting it with screwdriver i managed to get it working ...
but some of the settings must be wrong as i hav'nt got all the sources ...
and need to connect a few things to it ,
so if anyone knows which setting to change to activate all the sources would be a great help ...
Thank's Again
Paul
Keith:
Hi,
It is best to either erase the eeprom or fit a new blank one. Having a good dump will only get the set to start, same as a blank eeprom will, and a good dump is only really good for the set it came from, the adjustments may be different as different screens are used.
There is already a very long thread about this problem and all the info is there.
One important thing, READY should be set to 'ON' not 'OFF' as in the manual. Otherwise DTV doesn't work.
The adjustment manual is attached, be warned, there are over 600 adjustments to check!
paulb1970:
--- Quote from: Keith on February 07, 2012,05:40:59 ---Hi,
It is best to either erase the eeprom or fit a new blank one. Having a good dump will only get the set to start, same as a blank eeprom will, and a good dump is only really good for the set it came from, the adjustments may be different as different screens are used.
There is already a very long thread about this problem and all the info is there.
One important thing, READY should be set to 'ON' not 'OFF' as in the manual. Otherwise DTV doesn't work.
The adjustment manual is attached, be warned, there are over 600 adjustments to check!
--- End quote ---
Cheer's for the reply Keith ,
If i set my READY to ON - I lose my DTV ... So i've got to leave it set to OFF ...
So before i change every setting again ...
Is there 1 setting anywhere where i can change it to activate atleast the AV source or other Source's ???
ATM Analogue & DTV Picture's are perfect and everything seem's to work Perfect - so it's just the other source's that need activated ...
There must be a setting somewhere to activate / de-activate each source ???
(i've searched other thread's but cant seem to find anything about my problem )
Thank's Again
Paul
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version