« previous next »
Pages: [1]   Go Down

Author Topic: MLT666 REV 2.8  (Read 6437 times)

0 Members and 1 Guest are viewing this topic.

scooby-doo

  • Sr. Member
  • ****
  • Posts: 180
    • Email
MLT666 REV 2.8
« on: March 29, 2012,16:44:57 »
Hi

Got a TWF 32 with MLT666 in it...strange fault when plugging the cable in, get the front led lights up,flick the switch it just dies and light goes out and its completely dead
No voltages from anything on the psu....main fuse is fine..I know these suffer from blowing the fuse but this one seems ok and no shorts from fets

All caps "seem" to be ok on ESR and bulginess

Any help chaps and chapesses appreciated


« Last Edit: March 29, 2012,17:47:16 by scooby-doo »
Logged
NOT Spell checked unlike some posts

Mulja tv repair portal

MLT666 REV 2.8
« on: March 29, 2012,16:44:57 »

jordan

  • Hero Member
  • *****
  • Posts: 896
Re: MLT666 REV 2.6
« Reply #1 on: March 29, 2012,17:01:13 »
Check Q-2(FDP18N50)
          Q-14(STP5N60)
          D-3 (SF5L60)
Logged
Greeting from Slovenia
Jordan Čebron

scooby-doo

  • Sr. Member
  • ****
  • Posts: 180
    • Email
Re: MLT666 REV 2.6
« Reply #2 on: March 29, 2012,17:22:24 »
Cheers Jordan

The components you mention all come back ok

But thanks anyways

Logged
NOT Spell checked unlike some posts

Mulja tv repair portal

Re: MLT666 REV 2.6
« Reply #2 on: March 29, 2012,17:22:24 »

scooby-doo

  • Sr. Member
  • ****
  • Posts: 180
    • Email
Re: MLT666 REV 2.8
« Reply #3 on: March 30, 2012,07:19:07 »
Errmmmm Note to self

Make sure you check for a 240v supply at the power point then the switch before trying to get a voltage at the board.

Flick switch is fluffed all sorted now.

Cheers
Logged
NOT Spell checked unlike some posts

Mulja tv repair portal

Re: MLT666 REV 2.8
« Reply #3 on: March 30, 2012,07:19:07 »
Pages: [1]   Go Up
« previous next »