Forum > LCD TV forum

Sharp LC-42XD10E switches off.

(1/3) > >>

Davy:
As soon as you power on the red led goes to green then it trips off with a clunk, this is obviously the relay and a 'thump' from the audio section, to get it back on you have to disconnect the plug.

Just wondering if there are any tips available or voltage checks, since the boards do not carry any markings voltage or otherwise... just wondering if it could be the inverter since the back light doesn't get the chance to come on.

Dave

jordan:
Replace inverter board

sparky:
hi
YET why do you fell terrible

Davy:
Thanks jordan.... yep I was suspecting that.

Sorry to the other poster I just ignore stupid comments!

Edit:
Just realized it's a spammer... see signature!

Dave

faflefevre:
got the same make and model tv..sharp lc-42xd10e...mine when powered i get the red led when i press standby via remote the led turns from red to green and back to red..you can hear the relay click thats all that happens appears to be in the protection mode....in the past when i have had inverter board fault..you can dissconnect plug to inverter pcb and led will stay green but not in this case...thanks in advance for any help with this one

Navigation

[0] Message Index

[#] Next page