Author Topic: Is a repair kit available for E19029 psu (Read 7395 times)

sinclairtv · « **on:** June 07, 2012,08:55:23 »

Hi. Iv got a Technika 32-600 using a E19029 pwr supply. IC2 has blown its top. I cant locate replacememt supply online yet so I was wondering if anyone had fitted a kit or if there is one available. Checked OHMS Supply but board no wasnt recognised. Thanks

Mulja tv repair portal · « **on:** June 07, 2012,08:55:23 »

sparky · « **Reply #1 on:** June 07, 2012,10:20:01 »

hi
are there any more numbers on psu
dave

sabre504 · « **Reply #2 on:** June 07, 2012,10:25:31 »

Dave beat me to it

Was about to say i thought they used MLT668's in these and probably others .
A picture would be helpful

Mulja tv repair portal · « **Reply #2 on:** June 07, 2012,10:25:31 »

sinclairtv · « **Reply #3 on:** June 07, 2012,13:07:33 »

If you do an Ebay search with that no, a pic is there. Mebbe easier than me trying to put a pic on. Theres no other number on it. Its not a MLT668. The blown IC is surface mounted on the print side

sinclairtv · « **Reply #4 on:** June 07, 2012,13:08:49 »

http://www.ebay.co.uk/itm/23-TECHNIKA-LCD-TV-PART-PSU-POWER-SUPPLY-BOARD-CQC03001006425-E190219-C-/280821515255?_trksid=m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D8944294037254398716

Ohm Supplies · « **Reply #5 on:** June 07, 2012,14:14:19 »

Hello.

I have checked, we don't do a kit for this set. It's either a newish set we have yet to see or there's no common fault.

Sorry

Regards
Andy

Mulja tv repair portal · « **Reply #5 on:** June 07, 2012,14:14:19 »

sinclairtv · « **Reply #6 on:** June 24, 2012,11:55:22 »

I ordered the board from Ebay but there was no pic of it. The board that arrived was half the size and had the same pt no stamped on it..so there are 2 pwr board with E19029(C) stamped on it and it was just my luck to get the wrong one.

sinclairtv · « **Reply #7 on:** June 27, 2012,08:15:05 »

Andy at Ohms supply..you do a PSU repair kit http://www.ohmsupplies.co.uk/REPAIR-KIT-POWER-SUPPLY-LK4180-001B-TECHNIKA-LCD32-210 but its a bit expensive. Looks like its a LK4180-000B psu. IC2 on reverse has blown its top

jordan · « **Reply #8 on:** June 27, 2012,09:46:07 »

I have some solutions from Technika 32-601.To repair use KIT134 and this IC2 is some volt regulator

Ohm Supplies · « **Reply #9 on:** June 27, 2012,14:33:36 »

Hello,

You might be looking at the price for none trade. The kit is for a different board, so it won't do.

Regards
Andy

sinclairtv · « **Reply #10 on:** June 27, 2012,14:47:10 »

My board no is LK4180-000B..your kit does LK4180-001B. Any idea if its the same board..than I'll log in n get trade price. Tx

sinclairtv · « **Reply #11 on:** July 05, 2012,13:17:59 »

Got a repair kit from CHS but when fitted, the set comes on to green led but no sound or pic so thats £16 wasted...

Ohm Supplies · « **Reply #12 on:** July 06, 2012,13:43:34 »

The kit is for a different board, it wouldn't work. , the kits need to be ordered for the exact number, sometimes even a slight revision number means it won't do.

Regards
Andy

Mulja tv repair portal · « **Reply #12 on:** July 06, 2012,13:43:34 »

Mulja tv repair portal

News: