Author Topic: sharp-32sv1ea  (Read 4178 times)

0 Members and 1 Guest are viewing this topic.

WILLYAM1

  • Hero Member
  • *****
  • Posts: 310
    • Email
sharp-32sv1ea
« on: July 17, 2012,12:28:45 »
HI.
PROBLEM-red stby is on by powering led is green no backlight and go back to stby again.
i made the RESET process the tv was working fine about 30 min .
 i take the power off for a wile and power the tv again and the problem comeback again.
anotherRESET tv works for a 5min and stby again.
any aidia??is it a lamps problem?? or inverter?.
plees need help.
willyam1

Mulja tv repair portal

sharp-32sv1ea
« on: July 17, 2012,12:28:45 »

jordan

  • Hero Member
  • *****
  • Posts: 896
Re: sharp-32sv1ea
« Reply #1 on: July 17, 2012,13:00:13 »
You need in service mode reset error buffer
Greeting from Slovenia
Jordan Čebron

WILLYAM1

  • Hero Member
  • *****
  • Posts: 310
    • Email
Re: sharp-32sv1ea
« Reply #2 on: July 19, 2012,02:49:57 »
thanks Jordan.
how to reset error buffer?.
each time when tv goes to stby i making the RESET i can seethat the reson to that is the LAMP ERROR.
AFTER reser tv can works10min or even hours.
can it be that the problem is the lamps?.
willyam

Mulja tv repair portal

Re: sharp-32sv1ea
« Reply #2 on: July 19, 2012,02:49:57 »

WILLYAM1

  • Hero Member
  • *****
  • Posts: 310
    • Email
Re: sharp-32sv1ea
« Reply #3 on: July 20, 2012,11:05:43 »
hello to all.
tv is repaired .
the problem was at the INVERTER.
POOR CONTACTS IN ONE OF THE TRASFORMER.
THANKS WILLYAM1

Mulja tv repair portal

Re: sharp-32sv1ea
« Reply #3 on: July 20, 2012,11:05:43 »

 

download
download
download
download
download