Technika 42" LCD

[needsomehelp]

Hi Guys,

Really need some help if possible. I have a 42" technika about 3 years old. Was working ok this morning but when i went to use it this afternoon i switched it on to only see the screen flashing from blue to green to red in a cointinous loop. I have switched it off at plug for a while but nothing seems to work. Looks as if its stuck in a sort of test mode? Any ideas guys? Thanks in advance.

[jordan]

Mistakes are different of model to model. Your machine has mark? ? ?

[sinclairtv]

Unless you are going to put in a model no, you're wasting our time..but..theres a Sharp that has this same 'test mode' fault and if you press the 'menu' button on the remote, that clears it.

[sparky]

hi
with tv on in fault mode you must have orignal remote
just press menu on tv remote then put it in standby
then switch on fault cured
dave

[kennyc]

if it has got the same remote as a sanyo it is probably that has gone faulty and it messes the tv up .to clear it you need another remote . check back on previous sanyo posts its their on one of them

[kennyc]

jf you type in sanyo on the search box and look for the post by sinclair on march 12,2011 he explains it better than me