Author Topic: FSP271-5F01 power supply (Read 5470 times)

sinclairtv · « **on:** March 12, 2013,07:53:13 »

The set is stuck in standby so Im changing caps but I pulled out CS8 & CS35 thinking they were the same but 1 is 680 n the other is 1500 and I dont know what is what

. Can anyone oblige with values please. At edge of board beside white connector. Thanks

Mulja tv repair portal · « **on:** March 12, 2013,07:53:13 »

jordan · « **Reply #1 on:** March 12, 2013,11:25:06 »

CS08-1500uF/16V
CS35-1500uF/16V

sinclairtv · « **Reply #2 on:** March 12, 2013,15:35:25 »

Thanks..also found they are connected in parallel so made no difference.

Mulja tv repair portal · « **Reply #2 on:** March 12, 2013,15:35:25 »

E Parton · « **Reply #3 on:** March 13, 2013,18:10:24 »

Stuck in standby doesn't automatically indicate a power supply fault..
If all supplies from the psu board are present and correct ..then more likely the fault is on the main board.
Micro not running ..or firmware corruption is a possibility
rgds

sinclairtv · « **Reply #4 on:** March 14, 2013,11:23:56 »

in this case it was caps in PSU causing fault

Mulja tv repair portal · « **Reply #4 on:** March 14, 2013,11:23:56 »

Mulja tv repair portal

News: