Author Topic: Samsung LE32M87BD help needed with diagnosis  (Read 9892 times)

0 Members and 1 Guest are viewing this topic.

rubbishrat

  • Newbie
  • *
  • Posts: 5
    • Email
Samsung LE32M87BD help needed with diagnosis
« on: April 02, 2013,18:51:01 »
Could anyone please help with diagnosing this startup problem with this Samsung LE32M87BD,  I bought it with a stuck in standby problem. This was caused by CM856 - 820uf 25V  being high esr. replacing this cap revealed another problem, see movie ( if I've uploaded it ok )
 http://youtu.be/RsKdmOIc6UI  You can see that it clears up when I switch back on.
 I thought it looks like LVDS but switching off and straight on again always clears the fault, the horizontal lines that can be seen clear up after a few minutes, maybe heat related but I can't find anything with a can of freezer. At a bit of a loss to be honest, any suggestions appreciated. Thanks, Pete
« Last Edit: April 02, 2013,18:57:05 by rubbishrat »

Database Error

Please try again. If you come back to this error screen, report the error to an administrator.
download
download