Author Topic: Sharp LC-40LE811E (Read 4309 times)

markc · « **on:** May 11, 2013,05:45:41 »

Hi,
have one of these in for repair. Standby light flashing, nothing else happening. No response from controls or remote. Have swapped main board & PSU. Still the same fault.
Any idea's anyone?
Thanks
Mark

Mulja tv repair portal · « **on:** May 11, 2013,05:45:41 »

Kilroys · « **Reply #1 on:** May 12, 2013,09:25:21 »

Hi
Flash on and off.: ON for 400ms and OFF for 1600ms ?
If you want to see it again in high-speed blinking
just push the remote control MENU key.
Then it could be lamp or should I say led error.
Try to access the service menu.

thoma · « **Reply #2 on:** May 12, 2013,10:53:04 »

pull out the ir-receiver and trie
then pull out lvds t-con and trie
thoma

Mulja tv repair portal · « **Reply #2 on:** May 12, 2013,10:53:04 »

markc · « **Reply #3 on:** May 15, 2013,06:15:42 »

I cannot get any response from the touch panel. Initialy the flashing is a regular on off. If I press menu on the remote control the ICON changes to a long flash on then a short flash.

There are 2 inverters on the PSU so I assume this is not LED backlit?

Removing remote sensor or T Con makes no difference.

Thanks for your help. Any more ideas?

Mulja tv repair portal · « **Reply #3 on:** May 15, 2013,06:15:42 »

Mulja tv repair portal

News: