Author Topic: Samsung UE40C6000 (Read 5771 times)

thoma · « **on:** May 07, 2013,06:14:24 »

Hallo to all!
I have a Samsung UE40C6000 for repair
only the LED is flashing nothing more
can anybody help me please
thoma

Mulja tv repair portal · « **on:** May 07, 2013,06:14:24 »

thoma · « **Reply #1 on:** May 09, 2013,16:48:55 »

hi guys!
Are there no samsung specialist in this forum who can help me?
i can`t believe
thoma
please some tips!

jimca007 · « **Reply #2 on:** May 15, 2013,19:24:49 »

flashing standby light and refusing to come out of standby very common when secondary output capacitors go pop ! on the PSU have a look around the top right corner for bulged or leaking capacitors theres loads of threads about new caps then eeprom reset etc

Mulja tv repair portal · « **Reply #2 on:** May 15, 2013,19:24:49 »

michael first · « **Reply #3 on:** May 18, 2013,11:37:28 »

Hi,try this:unplug the connector from the psu to the main board and apply mains.if the psu is ok the backlights (led) will lit then you have to check the main board.

thoma · « **Reply #4 on:** June 04, 2013,09:29:36 »

The mainboard was defect
regards thoma

tvservice · « **Reply #5 on:** July 11, 2013,14:32:56 »

When you said the main board was at fault did you mean the power board PD46AF1E I would like to know as I have the same fault. I can hear the relay tripping on the power board.....

Thanks

Mulja tv repair portal · « **Reply #5 on:** July 11, 2013,14:32:56 »

Mulja tv repair portal

News: