Author Topic: Bush dled32947hd no sound  (Read 6182 times)

0 Members and 1 Guest are viewing this topic.

station-master

  • Jr. Member
  • **
  • Posts: 11
    • Email
Bush dled32947hd no sound
« on: July 09, 2013,13:27:37 »
Tv working great but no sound from speakers. Headphone socket works fine thanks.

Mulja tv repair portal

Bush dled32947hd no sound
« on: July 09, 2013,13:27:37 »

marky mark

  • Full Member
  • ***
  • Posts: 71
    • Email
Re: Bush dled32947hd no sound
« Reply #1 on: July 09, 2013,14:42:17 »
Have you tried buying a bigger set of headphones and turning the sound up to full?

watteau

  • Hero Member
  • *****
  • Posts: 206
    • Email
Re: Bush dled32947hd no sound
« Reply #2 on: July 10, 2013,08:03:30 »
Hi,
If you use headphones a lot, possibly the headphone socket is u/s causing the problem.
If not, you could try a factory reset - chassis is probably a Vestel, look to see
how to reset TV from other posts, failing that, probably sound output stage u/s.
regards.

Mulja tv repair portal

Re: Bush dled32947hd no sound
« Reply #2 on: July 10, 2013,08:03:30 »

In_Focus

  • Full Member
  • ***
  • Posts: 79
    • Email
Re: Bush dled32947hd no sound
« Reply #3 on: July 11, 2013,14:01:11 »
Also check the loudspeakers have not gone open circuit. If this is a Vestel it is not unknown for this to happen if the customer is hard of hearing and driving the loudspeakers hard, one goes o/c they then turn it up higher then the other one pops.

They can run rather warm at high volume.


trevorsheppard

  • Jr. Member
  • **
  • Posts: 19
    • Email
Re: Bush dled32947hd no sound
« Reply #4 on: July 14, 2013,07:37:51 »
Have an Alba with the same model number and it has intermittent sound, sound via headphone socket is ok. Figure it's probably audio output amp faulty. :dubbio:

watteau

  • Hero Member
  • *****
  • Posts: 206
    • Email
Re: Bush dled32947hd no sound
« Reply #5 on: July 16, 2013,05:10:28 »
Hi,
There's a common problem for intermittent sound, on certain Vestel chassis's.
if this set has one of these: VESTEL 17MB60, MB61, or MB62
and it uses a TPA3110D2 sound output I.C.
change: C1075, C1076, C1077, C1078
from 470nf to 1uf 6.3v
Regards

Mulja tv repair portal

Re: Bush dled32947hd no sound
« Reply #5 on: July 16, 2013,05:10:28 »

 

download