Author Topic: Sharp AQUOS completly dead. no stdy 5v. (Read 4749 times)

mzone · « **on:** July 17, 2013,09:17:13 »

anyone have any experience working on sharp tv.s

i have a Sharp AQUOS 60LE741E comming in soon. apparently set is completely dead & no white standby light . so i guess no standby 5v

the power supply board is Sharp RUNTKA932WJQz same as the picture i have attached so just wondering if anyone has repaired this board before with same symptoms and what components are the usual cause.

thanks

Mulja tv repair portal · « **on:** July 17, 2013,09:17:13 »

Kilroys · « **Reply #1 on:** July 18, 2013,06:45:06 »

No hidden power switch ?
No, then take a look at ic7903, looks to be a 5v stby ic TNYxxx
and of course components around.
Pin 5 should be 300V.

mzone · « **Reply #2 on:** July 18, 2013,07:30:21 »

Quote from: Kilroys on July 18, 2013,06:45:06

No hidden power switch ?
No, then take a look at ic7903, looks to be a 5v stby ic TNYxxx
and of course components around.
Pin 5 should be 300V.

thanks kilroys

when i get the set in workshop tommorow or friday i will check what you suggested and confirm my findings

Mulja tv repair portal · « **Reply #2 on:** July 18, 2013,07:30:21 »

mzone · « **Reply #3 on:** July 20, 2013,07:56:00 »

ok got tv in today.

i have spotted straight away that the q7801 transistor looks burnt and has i checked and its short.

its also took out the small d7804 surface mount diode underneith. i dont know the part number for these.

im pretty sure theres no a repair kit so it might need a new power board.

Mulja tv repair portal · « **Reply #3 on:** July 20, 2013,07:56:00 »

Mulja tv repair portal

News: