Author Topic: Bush LT42M1CFA changing channels on its own ?  (Read 5792 times)

0 Members and 2 Guests are viewing this topic.

bluesmoke

  • Full Member
  • ***
  • Posts: 53
    • Email
Bush LT42M1CFA changing channels on its own ?
« on: August 19, 2013,06:36:58 »
hi  I have a bush LT42M1CFA which has a weird problem .the tv is changing channels on its own ie the av menu box pops up and starts to scroll off the channel its on?
I thought it may be the mainboard so I got a replacement and for a while I thought it was ok but problem is back.i have removed the batteries from the remote any ideas? :41: :41:

Mulja tv repair portal

Bush LT42M1CFA changing channels on its own ?
« on: August 19, 2013,06:36:58 »

sleepy

  • Full Member
  • ***
  • Posts: 43
    • Email
Re: Bush LT42M1CFA changing channels on its own ?
« Reply #1 on: August 19, 2013,12:39:23 »
If this tv has manual controls try isolating them and see if this stops the problem, i've seen this on a couple of different sets.
It's also branded has a Haier tv.
« Last Edit: August 19, 2013,12:45:21 by sleepy »
Live long and prosper!

bluesmoke

  • Full Member
  • ***
  • Posts: 53
    • Email
Re: Bush LT42M1CFA changing channels on its own ?
« Reply #2 on: August 19, 2013,15:46:08 »
cheers in will have a try any idea which model haier it is ?

Mulja tv repair portal

Re: Bush LT42M1CFA changing channels on its own ?
« Reply #2 on: August 19, 2013,15:46:08 »

sleepy

  • Full Member
  • ***
  • Posts: 43
    • Email
Re: Bush LT42M1CFA changing channels on its own ?
« Reply #3 on: August 19, 2013,17:33:49 »
cheers in will have a try any idea which model haier it is ?


The model number is the same for Bush or Haier.
Live long and prosper!

Kev12175

  • Jr. Member
  • **
  • Posts: 14
    • Email
Re: Bush LT42M1CFA changing channels on its own ?
« Reply #4 on: August 20, 2013,06:36:17 »
If it has a power button board on the side of the unit try disconnecting it

cheeky2

  • Sr. Member
  • ****
  • Posts: 174
Re: Bush LT42M1CFA changing channels on its own ?
« Reply #5 on: September 01, 2013,16:05:30 »
I had the same problem with a 32inch bush model it turned out in the end to be a dodgy cap on the power board! The link for my post is here:
http://www.tv.quuq.org/forum/index.php?topic=5852.msg17448#msg17448
 The unit changed channel and switched itself on and off! The cap was a  220uf 35V it didn't look faulty but had a high esr
Good luck

Mulja tv repair portal

Re: Bush LT42M1CFA changing channels on its own ?
« Reply #5 on: September 01, 2013,16:05:30 »

 

download
download
download