« previous next »
Pages: [1]   Go Down

Author Topic: SAMSUNG.....PS50C450  (Read 8163 times)

0 Members and 1 Guest are viewing this topic.

chrissie jones

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 874
  • disk jocky for 32 years.started tv repairs 1985.
    • Email
SAMSUNG.....PS50C450
« on: September 20, 2013,10:57:22 »
Hi.had this samsung in today...guy said it was stuck in standby....when switch on starts tripping/ pulsing.with screen flicker.
« Last Edit: September 21, 2013,06:25:01 by chrissie jones »
Logged

Mulja tv repair portal

SAMSUNG.....PS50C450
« on: September 20, 2013,10:57:22 »

imran khan

  • Jr. Member
  • **
  • Posts: 31
    • http://sonysamsungfix.blogspot.com/
    • Email
Re: SAMSUNG.....PS50C450
« Reply #1 on: September 20, 2013,11:43:15 »
The Y and Z Sustain Boards (more simply called the YSUS and the ZSUS) are a serious weak point :03: :03:in ALL plasma televisions. Do a Google search for problems with plasma televisions or problems with
Logged

t1412

  • Hero Member
  • *****
  • Posts: 877
    • Email
Re: SAMSUNG.....PS50C450
« Reply #2 on: September 20, 2013,12:02:39 »
stick your meter on the va/vs test points see what your getting, get a service manual

shaun
Logged

Mulja tv repair portal

Re: SAMSUNG.....PS50C450
« Reply #2 on: September 20, 2013,12:02:39 »

old tvman

  • Sr. Member
  • ****
  • Posts: 114
    • Email
Re: SAMSUNG.....PS50C450
« Reply #3 on: October 02, 2013,15:50:32 »
Check the two 22ohm wirewound resisters ,one will be open circuit caused by the 6pin regulater 3BR1565JF ,Ihave had this fault a few times.
Logged

Mulja tv repair portal

Re: SAMSUNG.....PS50C450
« Reply #3 on: October 02, 2013,15:50:32 »
Pages: [1]   Go Up
« previous next »
 

download
download