Author Topic: Veste 17MB60-3 (Read 6722 times)

bakunoi2 · « **on:** November 27, 2013,17:34:39 »

Hi everybody! I got a little problem with a wonderful tv ...17mb60-3 vestel chasis but on the badge is called ISIS. rubbis . My problem is that once plugged in the white LED is flashing and nothing ales. I have checked all the voltages from PSU all ok, i have replaced the smd Transistors that r dealing with the protecttion, checked the rezistors, even replaced the 22uF capacitor that someone was talking about ...tv still ded.
The inverter is ok as is tested , but.... what ales can be dodgy in this rubbish tv??????
Im running out of idears and if i can't find a solutionil just sell it on Ebay ..
i hope someone had this fault and can share it with me

Thanks and best regards Vick.

Mulja tv repair portal · « **on:** November 27, 2013,17:34:39 »

jordan · « **Reply #1 on:** November 28, 2013,03:27:09 »

Update firmware

bakunoi2 · « **Reply #2 on:** November 29, 2013,20:36:05 »

Hi Guys , has anyone got a firmware for this 'thing'
Thank you !

Mulja tv repair portal · « **Reply #2 on:** November 29, 2013,20:36:05 »

Pinguinul1 · « **Reply #3 on:** July 10, 2014,12:59:32 »

hi guys, i am a LCD Orion, model PIF26-D, with MB 17MB60-3 , 140710, and i need dump for him, you can help me?

Thanks.

Turnip · « **Reply #4 on:** July 10, 2014,13:34:15 »

Hi Folks,

Got one too - Alba LED1691HD that doesn't fire up either, with the 17MB60-3 board.

Vestel is great - at least we get some shematics - Chris.

Mulja tv repair portal · « **Reply #4 on:** July 10, 2014,13:34:15 »

Mulja tv repair portal

News: