Author Topic: LG flatron plasma (Read 8189 times)

boo · « **on:** April 13, 2008,13:18:20 »

hi all just wondering if anyone can help....

got a LG flatron 42" plasma model number R242PX11 and there is no picture, got sound though...can anyone suggest what is wrong and if its goin to cost a fortune to repair or if possible to repair myself??

thanx

Mulja tv repair portal · « **on:** April 13, 2008,13:18:20 »

ernie · « **Reply #1 on:** April 14, 2008,17:02:07 »

you need to replace the y sus, z sus, and ctrl board. i beleive ohms supply (whos contact details can be found on these forums)can get these for you.i did mine with these three bourds cost me £85 but now works perfect i think ohms supply are cheaper,as i got mine elsewhere before i heard of them

BC109 · « **Reply #2 on:** May 13, 2008,05:14:41 »

Not sure if erine is thinking this is a V7 panel?
PX11 is a V6 panel. Fault is usually YSUS or ZSUS, YSUS seems to be more common. Check fuses on these board & voltage Vs & Vy as per panel. If the voltage/s are missing remove power to YSUS or ZSUS and see if it comes up.

Mulja tv repair portal · « **Reply #2 on:** May 13, 2008,05:14:41 »

ernie · « **Reply #3 on:** May 13, 2008,18:58:47 »

i was thinking of the v7 as that is what mine is and thats right you could get away with changing just the one board on the v6

BC109 · « **Reply #4 on:** May 13, 2008,23:59:54 »

I should of also said Lower YDRV board commonly faults, you can unplug this and see if it powers up too.
If its faulty, it's recommended to replace YSUS as well

Mulja tv repair portal · « **Reply #4 on:** May 13, 2008,23:59:54 »

Mulja tv repair portal

News: