Author Topic: SAMSUNG PS-42Q96HD (Read 10402 times)

chrissie jones · « **on:** May 01, 2014,09:26:30 »

Had this set in today.guy said it just clicking...on inspection I noticed QX802 and. QX801 had gone short and caps CX810/CX833.now got standby on front,but still clicking....fuses on Y and X boards ok...help!!!

Mulja tv repair portal · « **on:** May 01, 2014,09:26:30 »

jordan · « **Reply #1 on:** May 01, 2014,10:07:39 »

When QX801 and QX802 are S/C replace:
QX801,QX802,F801S(10A),F802(8A),QS801(FQA18N50V2),QS802(FQA18N50V2),SMD diode DS801(KDS187),SMD diode DS802 (KDS187),SMD resistor RS878,862,867 (all 20R)

Turnip · « **Reply #2 on:** May 01, 2014,11:20:01 »

Hi Chrissy,

Note that ChasHyde does several repair options - At least five, for various problems.

Nice telly, made us the pound - Chris.

Mulja tv repair portal · « **Reply #2 on:** May 01, 2014,11:20:01 »

chrissie jones · « **Reply #3 on:** May 01, 2014,11:41:48 »

Thanx turnip

Turnip · « **Reply #4 on:** May 10, 2014,11:28:11 »

Hi Chrissy,

Those two fets naturally run hot, and problems are usually due to dries on the board where re-soldering is due every couple of years - it's a cost improved 'Sammy' - Chris.

Mulja tv repair portal · « **Reply #4 on:** May 10, 2014,11:28:11 »

Mulja tv repair portal

News: