Author Topic: SANYO CE32LD33-B  (Read 4773 times)

0 Members and 1 Guest are viewing this topic.

chrissie jones

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 874
  • disk jocky for 32 years.started tv repairs 1985.
    • Email
SANYO CE32LD33-B
« on: May 14, 2014,05:30:50 »
Had this set in today.little old ladies said it take about 10mis to come..on inspection all capacitors look ok in power supply.....it's a vestal power board.number on board is 17pw20..has anyone had this fault before..

Mulja tv repair portal

SANYO CE32LD33-B
« on: May 14, 2014,05:30:50 »

downunder

  • Hero Member
  • *****
  • Posts: 1200
Re: SANYO CE32LD33-B
« Reply #1 on: May 14, 2014,06:07:31 »
Hi CJ, let the unit cool down, then heat the power supply with a blow dryer. If it then starts ok, then almost certainly caps, even if they look OK. Standby-5V rail filters commonly cause this.

chrissie jones

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 874
  • disk jocky for 32 years.started tv repairs 1985.
    • Email
Re: SANYO CE32LD33-B
« Reply #2 on: May 14, 2014,06:43:03 »
Thank oz

Mulja tv repair portal

Re: SANYO CE32LD33-B
« Reply #2 on: May 14, 2014,06:43:03 »

sparky

  • Hero Member
  • *****
  • Posts: 1223
    • Email
Re: SANYO CE32LD33-B
« Reply #3 on: May 14, 2014,06:55:05 »
Plenty of tips in database for this psu if you have time to check

chrissie jones

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 874
  • disk jocky for 32 years.started tv repairs 1985.
    • Email
Re: SANYO CE32LD33-B
« Reply #4 on: May 14, 2014,07:26:07 »
Nice one sparky....lol

t1412

  • Hero Member
  • *****
  • Posts: 877
    • Email
Re: SANYO CE32LD33-B
« Reply #5 on: May 14, 2014,11:42:34 »
i'd check those caps again with an esr meter thanks

regards
shaun

Mulja tv repair portal

Re: SANYO CE32LD33-B
« Reply #5 on: May 14, 2014,11:42:34 »

 

download
download
download