Author Topic: bush dled32165hd no sound or picture (Read 7756 times)

ivorbro · « **on:** November 06, 2014,09:59:44 »

Tv turns on with remote although not with the switch on the side of tv.backlight is on, but screen is light blue.led goes out when backlight comes on . believe the power supply is ok as this purchased as ok from supplier. Where should I look now?

Mulja tv repair portal · « **on:** November 06, 2014,09:59:44 »

Turnip · « **Reply #1 on:** November 06, 2014,11:05:45 »

Hi ivorbro,

Blue usually indicates no signal, would try other inputs to get some ideas where the problem is.

Note you didn't mention any OSG displays.

All the best - Chris.

ivorbro · « **Reply #2 on:** November 06, 2014,12:08:22 »

No osd , tried scart and hdmi no joy. Thanks for reply

Mulja tv repair portal · « **Reply #2 on:** November 06, 2014,12:08:22 »

Turnip · « **Reply #3 on:** November 06, 2014,12:19:25 »

Hi ivorbro,

Suggest main board - guess it's a Vestel.

All the best - Chris.

jordan · « **Reply #4 on:** November 06, 2014,12:28:31 »

Chassis 17MB82-upgrade software

ivorbro · « **Reply #5 on:** November 06, 2014,13:38:39 »

I only do this as a hobby, so how do I update software . Thanks

Mulja tv repair portal · « **Reply #5 on:** November 06, 2014,13:38:39 »

leonard085 · « **Reply #6 on:** November 08, 2014,06:58:03 »

When I have a tv in for repair and I suspect a software problem, the first thing I try to do,
is a reset (if possible).
To do a reset on a Vestel chassis,
when the tv is on, press "menu 4725 " on the remote control
the reset is normally in the options on the service menu
This will restore it to its original condition

Mulja tv repair portal · « **Reply #6 on:** November 08, 2014,06:58:03 »

Mulja tv repair portal

News: