hitachi 32ld6600

[call me al]

Hi all am struggling with this old hitachi 32ld6600 .stuck in standby red light on ,the power panel a 17pw15-8 have changedc877 and c878 alsoc878 c818 and ic807 still same any help much appreciated

[fix2003]

I found a good tip  disconnect source pin of Q837 on soft start of IC807.If  the set starts ok and  looks good . Then Q837 should be replaced to cure this problem.The fet is BSH103

also there is repair kit

[call me al]

thanks for info will try