Author Topic: LOGIK LCXW32HD1 - STUCK IN STANDBY (Read 7728 times)

rebel-mc · « **on:** May 30, 2008,23:42:59 »

Hi All,
I have a Logik LCXW32HD1 stuck in standby (red led constantly on). It's already had a psu from OHM supplies but still no joy. I'm thinking it's a fault with main board.

Any Ideas anyone?

Many Thanks for any help

Mulja tv repair portal · « **on:** May 30, 2008,23:42:59 »

norman · « **Reply #1 on:** May 31, 2008,06:48:19 »

Hi, The usual cause is TR20 which I think the primary goes open circuit. It tells you on the ohm supplies site the resistance readings for it. I don't know if they can supply it. Hope this helps. Norman

Ohm Supplies · « **Reply #2 on:** June 05, 2008,15:52:39 »

Hi

These can on the odd occason suffer from Scaler Board faults too.

You are welcome to send your other boards for testing.

Regards
Michelle

Mulja tv repair portal · « **Reply #2 on:** June 05, 2008,15:52:39 »

rebel-mc · « **Reply #3 on:** July 07, 2008,08:56:51 »

Does anyone no where I might get a mainboard for this model?

Any Help

Many thanks

Mulja tv repair portal · « **Reply #3 on:** July 07, 2008,08:56:51 »

Mulja tv repair portal

News: