Author Topic: SANYO CE42FH08-B STAND BY LIGHT (Read 4288 times)

kennyc · « **on:** July 30, 2015,14:04:58 »

Hi Guys ,have got the TV it has 17PW26-4 power supply and a 17MB38-1 main board . Usual problem think power supply is Ok and main board faulty but not 100% sure . Had another power supply but its out of a 32 inch Tv but still didnt work when changed . Any check to make sure its the main board before buying another one on E-Bay

Mulja tv repair portal · « **on:** July 30, 2015,14:04:58 »

fix2003 · « **Reply #1 on:** July 31, 2015,02:34:50 »

check the 1.8v supply to u123-the hdmi processor chip ic (an sil9185actu)
can some times get blown by "hot plugging" of HDMI connections. this drags down the 1.8 volts and causes all sorts of start up faults or stops set all together

kennyc · « **Reply #2 on:** August 07, 2015,07:48:49 »

Hi FIX2003,manged to get another power supply and it was still the same so must be the main board ,thanks for you help

Mulja tv repair portal · « **Reply #2 on:** August 07, 2015,07:48:49 »

fix2003 · « **Reply #3 on:** August 08, 2015,02:28:11 »

Quote from: kennyc on August 07, 2015,07:48:49

Hi FIX2003,manged to get another power supply and it was still the same so must be the main board ,thanks for you help

yes check on main board check the 1.8v supply to u123-the hdmi processor chip ic (an sil9185actu)

Mulja tv repair portal · « **Reply #3 on:** August 08, 2015,02:28:11 »

Mulja tv repair portal

News: