Author Topic: SHARP LC-39LD145K VESTEL CHASSIS (Read 5998 times)

old tvman · « **on:** August 13, 2015,06:56:19 »

Can anyone help with a download of the firmware for this model using the 17MB82-2 VESTEL BOARD and screen type ves390undc-01.Any help much appreciated
thanks davy

Mulja tv repair portal · « **on:** August 13, 2015,06:56:19 »

floapa311 · « **Reply #1 on:** August 14, 2015,03:41:41 »

hello
i need picture from label ssb

floapa311 · « **Reply #2 on:** August 14, 2015,03:53:42 »

see this link:
http://www.vesteldriver.com/TV_MB82_CORE_UPDATE.html

Mulja tv repair portal · « **Reply #2 on:** August 14, 2015,03:53:42 »

old tvman · « **Reply #3 on:** August 14, 2015,11:42:30 »

Thank you for your help floapa311, the number on the label is 10084540 which i dont see listed.

michael first · « **Reply #4 on:** August 14, 2015,12:53:00 »

hello,what's the problem with that tv,is it stuck in stand-by or what?

old tvman · « **Reply #5 on:** August 14, 2015,13:21:07 »

Standby led flashes red to blue 14 times, occasionly comes on with pic /sound normal.

Mulja tv repair portal · « **Reply #5 on:** August 14, 2015,13:21:07 »

michael first · « **Reply #6 on:** August 14, 2015,14:50:14 »

hello,if the PSU is running right,removing Q9 on the main board could cure the problem,as Q9 belongs to the

protection circuit and sometimes switches on without a reason.

old tvman · « **Reply #7 on:** August 14, 2015,17:32:52 »

I will try that and report back,thanks for your help.

old tvman · « **Reply #8 on:** August 21, 2015,07:36:16 »

Removed q9 still the same, retried to reflash it again using the upgrade link supplied and this time it worked.Thanks to all who replied help very much appreciated.
davy.

Mulja tv repair portal · « **Reply #8 on:** August 21, 2015,07:36:16 »

Mulja tv repair portal

News: