Author Topic: BUSH DLED32165HD (Read 6257 times)

kennyc · « **on:** September 18, 2015,06:58:50 »

Hi Guys , have had trouble with these sets before but have got one with sound and no picture . Screen black no backlight at all . Is there a way of testing if the screen is faulty because it seems to be the same as the latest Toshiba where the equivalent of the inverter board is built inside the screen itself. Thanks for any advice

Mulja tv repair portal · « **on:** September 18, 2015,06:58:50 »

papisco · « **Reply #1 on:** September 20, 2015,14:18:14 »

Hi, I have the same TV, but when powered up the led flashes 9 times and stays on but the TV doesn't come at all, any advice will be highly appreciated.
Thanks

kennyc · « **Reply #2 on:** September 21, 2015,16:19:22 »

Papisco ,all I can help you with is you should get 28V on the end of the 4 diodes . Have had the main board cause the same fault as you have

Mulja tv repair portal · « **Reply #2 on:** September 21, 2015,16:19:22 »

call me al · « **Reply #3 on:** September 22, 2015,05:58:22 »

Hi guys As this is a led backlight its proberly a fault with the led strips. You will need to strip down to the leds and apply 20v to each strip to see if they all light, good luck

kennyc · « **Reply #4 on:** September 22, 2015,07:15:51 »

Hi Cal Me Al ,problem is I had the same problem with a Toshiba . Stripped it all down but the lights are glued down

papisco · « **Reply #5 on:** September 23, 2015,10:40:53 »

Thanks mate' did you end up changing the power board then.

Mulja tv repair portal · « **Reply #5 on:** September 23, 2015,10:40:53 »

kennyc · « **Reply #6 on:** September 24, 2015,07:11:34 »

Am waiting for another TV with the same power supply in it then can swop over and see what happens Papisco

old tvman · « **Reply #7 on:** September 24, 2015,13:58:57 »

Almost certain to be one of the leds going open circuit on the led strips,as mentioned earlier check by supplying 20v to each strip or 4v to each individual led.

papisco · « **Reply #8 on:** October 14, 2015,06:42:52 »

Hi Kennyc old Tvman is right, I changed the power supply and mother board in mine, only to find that a led in the backlight is open, and if you put a good power supply board and switch it on, the voltage to the backlights drops to zero, in fact am now looking for the culprit that has cut of the voltage on the psu.

kennyc · « **Reply #9 on:** October 15, 2015,05:32:57 »

Hi Papisco ,if you manage to fix the fault let us know how you did it . Have got this TV + 2 Toshibas with the same fault but havent tried to repair the tubes . Dont know if you can get replacements or even if you can take them out to replace . Somebody else said they were glued in and were not removeable. Good luck anyway

Mulja tv repair portal · « **Reply #9 on:** October 15, 2015,05:32:57 »

Mulja tv repair portal

News: