Author Topic: Bush 22/207FDVD - UMC - Red Led, No go.  (Read 4170 times)

0 Members and 1 Guest are viewing this topic.

Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Bush 22/207FDVD - UMC - Red Led, No go.
« on: December 20, 2015,09:44:06 »
Hi folks,

Got one in where Red Led glows, but buttons and RCU do nothing. PS outputs seem OK so suspect Eeprom trouble.   UMC have website (umc-uk.co.uk/firmware) but they don't list Bush.

Not at all keen on UMC sets, being totally budget, and this one is a horror to try get apart to service.

Any thoughts ? Thanks - Chris
« Last Edit: December 20, 2015,11:15:56 by Turnip »

Mulja tv repair portal

Bush 22/207FDVD - UMC - Red Led, No go.
« on: December 20, 2015,09:44:06 »

watteau

  • Hero Member
  • *****
  • Posts: 206
    • Email
Re: Bush 22/207FDVD - UMC - Red Led, No go.
« Reply #1 on: December 22, 2015,07:50:59 »
Hi,
Ohmsupplies and CHS (usually cheaper than Ohmsupplies) do eeprom's for some UMC clones, try searching with the complete
model number
Regards

Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Re: Bush 22/207FDVD - UMC - Red Led, No go.
« Reply #2 on: December 22, 2015,11:33:47 »
Thanks John,

Unusual for CH to be cheaper - Will have a look - Chris.

Had a look about - Uses T.MSD309.B66B main board, seems too new to be yet listed. Guess on the pile for a year or so 'till something pops up.

Info on set back just a bit confusing -

Bush 22/207FDVD   Also  Bush 21.5” LED TV  HA21K207BFHKDPSG254 – 110280 04979
Cat No. 249/4673D.

Lot of info for a crap set where no-one yet admits having made it - Fun.
« Last Edit: December 24, 2015,10:17:30 by Turnip »

Mulja tv repair portal

Re: Bush 22/207FDVD - UMC - Red Led, No go.
« Reply #2 on: December 22, 2015,11:33:47 »

 

download