Author Topic: Technika 40" HD LCD (Read 13887 times)

Scouse · « **on:** June 06, 2008,14:14:53 »

Has anybody got service manual for this lcd hd tv please. Power light goes on but when going to turn it on power light just dimms and tv won't go on, All ideas gratefully accepted, THANKS

Mulja tv repair portal · « **on:** June 06, 2008,14:14:53 »

Ohm Supplies · « **Reply #1 on:** June 06, 2008,15:21:46 »

Hi Scouse

We'll need to know board numbers from inside please. Maybe we can identify better that way.

Regards
Michelle

Scouse · « **Reply #2 on:** June 06, 2008,18:01:24 »

Thanks for the reply I will write them down in the morning and post, Thanks

Mulja tv repair portal · « **Reply #2 on:** June 06, 2008,18:01:24 »

Scouse · « **Reply #3 on:** June 09, 2008,11:13:00 »

I have opened it up and it has power board 17PW16-2 and 17MB22 main board any Ideas greatfully received, Thanks

Ohm Supplies · « **Reply #4 on:** June 09, 2008,14:36:18 »

You need to start by reading the Voltage O/P's from the Power Supply. You should have a 3.3v stby / 5stby / 3.3v switched / 5v switched / 12v switched/ 33v switched/ 24 v inverter.

You will also have backlight ON voltages on the Inverter plug, from memory around 3v.

Let me know how you get on.

Regards
Michelle

Scouse · « **Reply #5 on:** June 09, 2008,15:59:59 »

Thnks for that will give it a go, when I checked first off there seemed to be no voltage coming off the board. Is there any diagrams to this board (17PW16-2) as this would make life s much easier. Michelle I see you come from Ohms Supply. Do you do a check and repair service on these boards and if so how much also what is the difference between 17PW15 and 17PW16 as I have a working one of these, Thanks.

Mulja tv repair portal · « **Reply #5 on:** June 09, 2008,15:59:59 »

tv tony · « **Reply #6 on:** August 19, 2008,08:25:53 »

here it is, good luck
tony walker

Mulja tv repair portal · « **Reply #6 on:** August 19, 2008,08:25:53 »

Mulja tv repair portal

News: