Author Topic: Panasonic SA-BT222 - Error code F76  (Read 5624 times)

0 Members and 1 Guest are viewing this topic.

Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Panasonic SA-BT222 - Error code F76
« on: March 21, 2016,05:45:34 »
Hi folks,

Have this Blu-Ray cinema in where at switch on it displays 'Please Wait' for a few seconds before showing F76 then cutting out - Any thoughts ? - Thanks, Chris.

Later - Warmed up the S/by PS area and it came on - Guess caps but not yet narrowed it down to anything specific.
« Last Edit: March 21, 2016,09:56:28 by Turnip »

Mulja tv repair portal

Panasonic SA-BT222 - Error code F76
« on: March 21, 2016,05:45:34 »

michael first

  • Hero Member
  • *****
  • Posts: 201
    • Email
Re: Panasonic SA-BT222 - Error code F76
« Reply #1 on: March 21, 2016,12:59:35 »
Hi Chris,

F76 is displayed when there is an abnormality in the output voltage of the stabilized power supply;this is due to any of the

DC voltages(+9V,+7V,-7V,+5V,+5.3V,etc.);pressing 'STOP' button on the keyboard will bring up the next error on the

display;anyway,surely you know how to find out the bad cap(s).

Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Re: Panasonic SA-BT222 - Error code F76
« Reply #2 on: March 21, 2016,13:15:59 »
Thanks Mike,

First had the thought it might be an audio output issue so pulled out the supply feed to the panel.

Got another error code that possibly suggested I'd pulled the plug out.

Mention as don't have the manual, also other folks might have the problem - Noticed on line that they do, and guess only Quuq folks will help sort it - Chris

Mulja tv repair portal

Re: Panasonic SA-BT222 - Error code F76
« Reply #2 on: March 21, 2016,13:15:59 »

jordan

  • Hero Member
  • *****
  • Posts: 896
Re: Panasonic SA-BT222 - Error code F76
« Reply #3 on: March 21, 2016,14:06:48 »
Error code 76
Replace C-5726 (10uF/50V/105 degre) near Q-5720 (STRX-6768)
« Last Edit: March 21, 2016,14:11:51 by jordan »
Greeting from Slovenia
Jordan Čebron

downunder

  • Hero Member
  • *****
  • Posts: 1187
Re: Panasonic SA-BT222 - Error code F76
« Reply #4 on: March 22, 2016,03:13:25 »

Hi Chris,

That's good oil from Flash Jordan. This cap usually kills the power but can cause F76.

I attach a diagnostic for F76 troubleshooting, but I wonder what the author was on.

Bruce

Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Re: Panasonic SA-BT222 - Error code F76
« Reply #5 on: March 22, 2016,07:02:19 »
Hi Jordan and Bruce,

Replacing C5726 did the job - Checked and it was down to 0.6Mfd.

Noticed the main cap holds it's charge quite a long while after switch off, glad I flashed a lamp across it before it got me.

Many thanks -  Najlepša hvala prijatelj (I think) - Chris.

Mulja tv repair portal

Re: Panasonic SA-BT222 - Error code F76
« Reply #5 on: March 22, 2016,07:02:19 »

 

Powered by EzPortal
download
download