Author Topic: Panasonic TX-L37ETS51 (Read 5276 times)

thoma · « **on:** June 19, 2017,09:39:59 »

Hello to all!
Have Panasonic TX-L37ETS51 LA35 Chassis with PSU TNPA 5583
The set is dead no std by led you can not switch on the Voltages from PSU are available!
need schematic and tips!A-Board defective?
regards thoma!

Mulja tv repair portal · « **on:** June 19, 2017,09:39:59 »

downunder · « **Reply #1 on:** June 20, 2017,03:07:14 »

Hi thoma,

The standby LED is controlled by the A board. If you're happy that the power supply is OK, then it'll be the A board faulty.

Bruce

thoma · « **Reply #2 on:** June 20, 2017,08:12:56 »

thank you!Change the A Board too expensive!mistake repairable on A Board?
regards thoma!

Mulja tv repair portal · « **Reply #2 on:** June 20, 2017,08:12:56 »

downunder · « **Reply #3 on:** June 21, 2017,03:11:14 »

Not a service-friendly board. Never had any luck in repairing one and have no idea what would be causing the problem.

Bruce

Mulja tv repair portal · « **Reply #3 on:** June 21, 2017,03:11:14 »

Mulja tv repair portal

News: