Author Topic: Panasonic update issue. (Read 7402 times)

Turnip · « **on:** March 07, 2018,09:50:34 »

Hi folks,

Just had three TX-L32/37E3Bs and a TX-P50X50B in for the issue where an over air update has maybe zonked them giving a flashing Green Led and nothing else.

Seems holding in S/by switch and holding in another on the set (Seems to vary a bit) for a few seconds, normality is resumed. Turned off 'updates' as someone suggested - Bit of an earner in these hard times - Chris.

Mulja tv repair portal · « **on:** March 07, 2018,09:50:34 »

Keith · « **Reply #1 on:** March 09, 2018,17:32:05 »

Hi

Over the air updates will cease from 30th April, so no problems with this type of set. Newer sets with internet connections will get updates via the web, so lots more problems there!!!!

Keith

Turnip · « **Reply #2 on:** March 11, 2018,10:19:39 »

Nice one Keith,

Like the idea of mending sets without needing take the back off, especially when they come in droves - Chris.

Mulja tv repair portal · « **Reply #2 on:** March 11, 2018,10:19:39 »

downunder · « **Reply #3 on:** August 16, 2018,03:57:37 »

Bit late in the day, I know, but just located this bulletion I had stored away. Bruce

Turnip · « **Reply #4 on:** August 17, 2018,10:00:29 »

Hi Bruce,

Had yet another one in a day or two ago, even though seems over air updates ceased end of April this year. Strangest thing is after the bulletin is followed, one way or another. Led sets seem OK, but plasma can come back time and again for the same problem where custs insist they're switched off overnight.

Some aged folks have even donated rather nice plasma sets, where back at the ranch we find no problems.

Guess Yoof rules - Chris.

Mulja tv repair portal · « **Reply #4 on:** August 17, 2018,10:00:29 »

Mulja tv repair portal

News: