Forum > PLASMA TV forum
PHILIPS FTR9965 RECEIVER BOX
brian:
Hi;
As anyone got a service manual?,for this box. the fault is as follows,
The display panel is working o.k. but the receiver powers on,with
picture and sound for a few seconds,then picture breaks up into lines and the box switches back into standby!
On entering sam, no error codes are present, have replaced all electrolytics in power supply. Very rarely box will run ok! till switched off and back on then fault returns.
Many Thanks
Bri.
BC109:
Do you have model & chassis number of panel/TV?
brian:
Hi BC109
The model is 42FD9944/01S
CHASSIS IS FM24
THANKS ,
BRI.
brian:
Hello, AgainMore info. By entering the box SAM, as opposed to the PDP,SAM!,Have found the following:ERROR CODES.066053077050000DEFECTIVE MODULE +3V (Fbx) SUPPLY.Have also found that by changing to a "stand alone"option the box will work o.k.!!Puzzled?Thanks AgainBRI.
brian:
Hi,
That should read
066,053,077,050,000
Cheers
Bri.
Navigation
[0] Message Index
[#] Next page
Go to full version