Forum > PLASMA TV forum

PHILIPS FTR9965 RECEIVER BOX

<< < (3/3)

DAVIDTV:
My Philips 33FD9944/01S is now working having changed several electrolytic capacitors in the power supply.  The television only as a VGA input and works well when connected to my computer.  It is normally connected to a Philip FTR9964/12S receiver unit.  If I connect a television to either External 1 or External 2 SCART and push the power button the following happens:
The power LED is red for an instant, the relay on the power supply energises. The power LED turns orange.  After about 2 seconds the picture from the analogue tuner appears but without sound.  The picture remains for about 6 seconds.  The power LED turns green, almost immediately the relay de-energises and the power LED starts flashing.
I’ve checked all the electrolytic capacitors in the power supply in-situ with a Peak Atlas ESR meter and all appear to be satisfactory.  I’ve also bridged each voltage output from the power supply in turn with a large capacitor.  This made no difference.  I’ve also tried a large capacitor across the input to the 3.3 volt regulator (7009) and a 47 mfd capacitor across its output, again with no change.
Please can anyone help?
I have managed to download the manual for the 33FD9944/01S but have been unable to find a free download for the FTR9964/12S receiver unit.

brian:
Hi,
Have you tried entering the sam mode of the box (not the panel)
and changing the "stand alone" option to yes?
The procedure for this can be found if you google "lumenlab" and enter FTR9964 in the search box and read the forum notes
Hope this helps
Bri

Navigation

[0] Message Index

[*] Previous page