Forum > PLASMA TV forum

PHILIPS FTR9965 RECEIVER BOX

<< < (2/3) > >>

BC109:
 :ciao:

BC109:
 :dry:

BC109:
 :ciao:

BC109:
I think this relates to your model.
Set turns on for ~10sec,no display, LED flashes red, then standby.
Low 3.3V & 5V rails trigger protection.

Rebuild power supply, 3.3v & 5V lines filter caps dry up.
I have found a few Philips plasma with different chassis all suffering similar problems. 3.3v & 5v filter caps.

Also check XSUS look for 2 SMD caps in the top right corner, C48 & C49 (10u each), replace.

Good luck

brian:
Hi,
Replaced all elect.caps. as advised. Also the caps in the media box p.s.
Everything now o.k.
Many thanks
Bri.

Navigation

[0] Message Index

[#] Next page

[*] Previous page