« previous next »
Pages: [1]   Go Down

Author Topic: Swisstech SKY-EJ32/WICG DEAD  (Read 6562 times)

0 Members and 1 Guest are viewing this topic.

kbs

  • Jr. Member
  • **
  • Posts: 21
    • Email
Swisstech SKY-EJ32/WICG DEAD
« on: July 10, 2009,14:45:07 »
hi
      This set is completly dead i have no manual and there are no voltage marking on the board, I have changed all the caps in the secondary supplies with no results can anybody give me some help Please.Cheers
Logged

Mulja tv repair portal

Swisstech SKY-EJ32/WICG DEAD
« on: July 10, 2009,14:45:07 »

Contrast John

  • Sr. Member
  • ****
  • Posts: 127
    • Email
Re: Swisstech SKY-EJ32/WICG DEAD
« Reply #1 on: July 11, 2009,16:08:40 »
Hi kbs
Posted a couple of faults on this site for a Swisstech J32 LCD tv with a FSP212-3F01 power board. Situation sounds similar to yours- after replacing the electrolytics the set was still dead. The information on it is in the faults area of this site. If yours is the same model no led illumination indicates the 'always' 5 volt line is missing. Check out this area as described in fault posts. Good Luck.

John.
« Last Edit: July 12, 2009,09:43:26 by Contrast John »
Logged

veromade

  • Jr. Member
  • **
  • Posts: 31
    • Email
Re: Swisstech SKY-EJ32/WICG DEAD
« Reply #2 on: July 29, 2009,04:12:52 »
Thanks for your information
Logged

Mulja tv repair portal

Re: Swisstech SKY-EJ32/WICG DEAD
« Reply #2 on: July 29, 2009,04:12:52 »
Pages: [1]   Go Up
« previous next »
 

download
download