Bush lcd 27tv006hd

[brian]

Hi,
Anyone got circuit diagram for power supply type, 04TA0691. fitted mod kit but set not starting up, just standby led pulsing.Can only find a 5v supply and 24v supply but nothing else. i.e. no 3.3v or 12v! have checked all elect.caps. Help!! p.s. Tr20 is o.k.
Bri.

[Turnip]

Hi Brian,

   Notice that PS is the one with sound chip. Don't have that one but have one quite similar. Had one like yours in the other day, a Medion MD30112 where it wouldn't fire up. Replaced C356 and C352 (both 47/50) and C351 and C349 (both 1000/25) - did the biz. Three days later, still on soak, and after phoning the customer -  the FSD200 blew up (as they do)  But after a few zeners, diodes, opto, and BC337 later, still got the cash - no guarantees though.

   Hope it helps - Chris.

[brian]

Thanks for the reply Chris,will get parts and see what happens.
And will let you know the outcome.
Thanks again
Bri.

[brian]

 
Hi,
Success!!,replaced c361 and c402 both 8n2k 400v caps. in p/s
set now up and running.
Thanks.
Bri.

[Turnip]

Hi Brian,

  Congratulations, haven't seen those listed before as a fault, as it's usually secondary caps. Guess they went O/C, and if so, was it obvious on inspection ?

  I'm curious, as I have one that doesn't fire up on the 12 and 5 volt side, and have replaced most everything apart from C361.

  A Profilo-phobe - Chris.

[brian]

 :unknw:
Hi,
Guess what, switched set on today, and sod,s law, back to square one!
Just about sums this week.
Sorry for the premature fix.
Cheers
Bri.

[Turnip]

Hi Bri,

  Had that sort'a week myself, but next week is just a day away, so keep to the bright side - would att
ach a well known track, but probably the wrong site - chris.