Forum > LCD TV forum

Evesham ALQEM37WX1080P TV

<< < (3/5) > >>

Mac0001UK:
Thanks very much Sparky,
I live in hope and down to my last rather inadequate telly for the moment.  :huh1:
Chers,
Mac

theo laird:
Both windings are O/C. They should each read between 950 and 1000 ohms. Pins 2+3 should read S/C or if you have a good meter 0.5 ohm. Check the board to see if it was made by DARFON, if so the part you need is available under another number. 4006 or 9?????????????????? Seen them on ebay.


h**p://cgi.ebay.co.uk/LCD-INVERTER-BOARD-TRANSFORMER-TYPE-4006A_W0QQitemZ260485314074QQcmdZViewItemQQptZUK_AudioTVElectronics_Video_Televisions?hash=item3ca622761a&_trksid=p3286.c0.m14

sparky:
beware they say will work but don't you might not get your
cash back,check previous posting

theo laird:
Tend to agree, there are plonkers out there selling the o/c ones.

Mac0001UK:
Thanks Theo,
I shall have a look at the board, and be careful where I go from there.
Cheers,
Mac

Navigation

[0] Message Index

[#] Next page

[*] Previous page