Author Topic: technosonic lcd 1908 (Read 14598 times)

mac18 · « **on:** November 14, 2009,03:26:43 »

HI, ANYONE GOT ANY IDEA WHAT THE SPEC IS FOR THE TRANSFORMER ON THIS LCD, AS I HAVE BEEN LOOKING FOR MONTHS TO GET A NEW ONE NOW TO TRY FOR AN EQUIVALENT ONE TO FIT.

Mulja tv repair portal · « **on:** November 14, 2009,03:26:43 »

tv tony · « **Reply #1 on:** November 14, 2009,04:39:17 »

hello, which transformer, the smps or the invertor one?

mac18 · « **Reply #2 on:** November 26, 2009,17:22:10 »

its the one at the top of the main power supply its marked zy-t0045 yellow in colour.

Mulja tv repair portal · « **Reply #2 on:** November 26, 2009,17:22:10 »

mac18 · « **Reply #3 on:** December 02, 2009,14:36:05 »

help required :wallbash:

mac18 · « **Reply #4 on:** December 07, 2009,03:16:52 »

anyone know who keeps spares for this lcd?. web site ,phone number anything.

sparky · « **Reply #5 on:** December 07, 2009,09:57:14 »

can you post pic of power supply

Mulja tv repair portal · « **Reply #5 on:** December 07, 2009,09:57:14 »

mac18 · « **Reply #6 on:** December 08, 2009,16:29:59 »

Here is a pic of the psu section.

sparky · « **Reply #7 on:** December 08, 2009,16:35:46 »

what are they ringed for

mac18 · « **Reply #8 on:** December 08, 2009,16:51:30 »

these have been replaced except the one at top left.

sparky · « **Reply #9 on:** December 08, 2009,17:36:07 »

what is the original fault, is it dead or tripping try checking the
two diodes on the heatsink at top of tne panel

daz · « **Reply #10 on:** December 09, 2009,09:08:13 »

test d102 for short or leaky and r110 for o/c
had the fault a few times
daz

mac18 · « **Reply #11 on:** December 09, 2009,14:07:50 »

transformer makes a high frequency noise after ten minutes when the back cover is fitted, if you leave the cover of it works fine changed the ceramic capacitors which made a slight difference, now think the transformer is over heating creating this noise.

Turnip · « **Reply #12 on:** December 10, 2009,05:50:46 »

Hi Mac,

Used to dip such things into a tin of varnish or epoxy then hang up to set - some folks suggest superglue - always worked, but these modern chopper transfomers can get really hot in normal use - just a thought, only prob I had with this set was with a S/C Shottky dual diode - Chris.

mac18 · « **Reply #13 on:** December 13, 2009,03:21:15 »

Tv Tony was going to be sending a new transformer back in march but never did. CHEERS TONY!!!!!

sparky · « **Reply #14 on:** December 13, 2009,03:30:25 »

hi
i thought i was waiting from tv tony long enough but
you beat me

Mulja tv repair portal · « **Reply #14 on:** December 13, 2009,03:30:25 »

News:

Author Topic: technosonic lcd 1908 (Read 14598 times)

Mulja tv repair portal

Mulja tv repair portal

Mulja tv repair portal

Mulja tv repair portal