Author Topic: Bauer XT32 / Phihong PSU fault (Read 16001 times)

michael first · « **Reply #15 on:** September 04, 2010,04:37:25 »

Hi,Halen
it seems the only way to solve your problem is to replace the eprom u302(24c32) loaded with the right values;unfortunately I don't have that file.Cheers.

Mulja tv repair portal · « **Reply #15 on:** September 04, 2010,04:37:25 »

halen · « **Reply #16 on:** September 04, 2010,14:38:03 »

Yes thank you. I will contact service and ask them for help.

malcolmstv · « **Reply #17 on:** January 06, 2014,10:23:00 »

I know this is an old thread...
but I thought it worth mentioning that the 22uF 400V cap that is the reservoir for the +5V standby is also a common cause of a TV with this PSU being dead. Cap only measures 1-2uF with a meter.
The +5V actually measures around 4.8V in this fault condition, there is no standby light on the set. When scoped the +5V rail has around 1.3V of ripple, hence the housekeeping CPU not starting.

Happy New Year!

Mulja tv repair portal · « **Reply #17 on:** January 06, 2014,10:23:00 »

Turnip · « **Reply #18 on:** January 08, 2014,11:23:58 »

Nice one Malcolmstv,

Just had one in where the s/by chip hadn't popped but set wouldn't start, and no s/by led - could well be the biz.

Thanks - Chris.

Mulja tv repair portal · « **Reply #18 on:** January 08, 2014,11:23:58 »

Mulja tv repair portal

News: