Author Topic: SAMSUNG 19 LCD MODEL 932MW.....CODE LS19MASF/EDC (Read 4157 times)

chrissie jones · « **on:** July 03, 2011,11:39:08 »

this set works fine untill picture dims then backlite goes out all togeather after 10 minutes...help please.

Mulja tv repair portal · « **on:** July 03, 2011,11:39:08 »

sparky · « **Reply #1 on:** July 03, 2011,14:05:10 »

hi
its the inverter transformer stock fault try wiltsgrove
dave

michael first · « **Reply #2 on:** July 04, 2011,02:01:35 »

hi,if it's mounted fan7314 as the inverter's controller,try to solder a wire between pin #1 and gnd;it works if the transformer is safe.

Mulja tv repair portal · « **Reply #2 on:** July 04, 2011,02:01:35 »

chrissie jones · « **Reply #3 on:** July 04, 2011,02:54:58 »

can you point out pin one for me please.

michael first · « **Reply #4 on:** July 04, 2011,05:07:37 »

hi,I'm sorry but I haven't a pic of it so look for the mark on ic's body(look for c624 mounted on pin #1);also,I have to point out the error I made,not a jumper but a 1k resistor!sorry

Mulja tv repair portal · « **Reply #4 on:** July 04, 2011,05:07:37 »

Mulja tv repair portal

News: