KOGAN kgnukfhdledbd32vaa
32inch led bluray TV
This is the frimware to allow use of the sky remote control
This will allow you to use the TV with your SKY remote if the sensor on the TV is working correctly.
Once you have done this, please follow the steps below to program your SKY remote
1) While TV is on, press the ‘TV’ button on the SKY Remote.
2) Hold down the ‘Select’ and ‘Red’ buttons for 2--‐3 seconds until the LED blinks twice.
3) Enter the 3 digit code: ‘207’.
4) Press the ‘Select’ button to store. Press ‘TV’ and any channel number to test. If this does not operate the TV set, please try again.
Update of firmware confirmed working, updated by using blank usb drive with bin file
No picture of board or eeprom details
