Forum > LCD TV forum

Logik LCXW32HD1-Standby Transformer Problems

<< < (2/8) > >>

Ohm Supplies:
i cut the tape so i can see the wire on the coil then "loop" the leg and re-attach,

there will be a shortened version of this kit released in the next week or so, kit/kt number 15something, it will have less parts and therefore cheaper, but will have an additional part or 2.

With just the board switched on and upside down (so you can see the track undernieth) put your meter on the 2 points above c55 so you can check your repair before fitting it into the set

regards
Andy

scooby-doo:
I think I have screwed this transformer up now :oops:

The wire has snapped and I haven't got anything to solder too.

Back to the drawing board on this one.

Thanks for all your help

Will the new kit include the transformer???

Ohm Supplies:
Sorry, the part is not available as an individual item as it seems to be unique to this board, stand by transformers can be quite expensive to buy individually and to have them made would need a min. order of between 3,000 and 50,000 (we enquired on one once)
  If you gently cut away some insulation without cutting the core, loop round the leg, tin both ends then solder together it should be repairable. Of all the ones I’ve done I’ve never know the wire not to be retrievable,

regards
Andy

scooby-doo:
Andy cheers, you have obviously never worked with a clumsy bafoon like me.

I have just had a result and bought a faulty PSU for a tenner. with two more cracks of the whip I should get it right. Fingers crossed

Ohm Supplies:
i'd say its 1 in 20 that the tx is damaged, it depends which way the fsd blows, upwards or sideways etc.

Andy

Navigation

[0] Message Index

[#] Next page

[*] Previous page