Forum > LCD TV forum
Acoustic Solutions LCDW22DVD95F stuck in stand-by mode
Zyphon:
--- Quote from: sparky on August 25, 2011,13:55:56 ---hi
have you checked any caps or diodes? on psu
dave
--- End quote ---
No I haven't had the chance to test them yet. I was kind of hoping that I would get lucky and someone would recognise this board and tell me that there a common fault with it. Alas I think these Acoustic Solutions are re-badged so I may have to delve deeper.
The multimeter I have does have a capacitor tester but I would need to take them out of circuit in order to test them. I will do that this weekend and go through a process of illumination I guess. Lots of de-soldering heading my way, lol.
dougc:
Hi, I have just salvaged a 17ips02-2 from a sanyo 22". Yours for 20 quid. Cheers, Doug
sparky:
thats good value
dave
Zyphon:
--- Quote from: dougc on August 25, 2011,18:39:22 ---Hi, I have just salvaged a 17ips02-2 from a sanyo 22". Yours for 20 quid. Cheers, Doug
--- End quote ---
Hi Doug, thanks for your kind offer and £20 is very reasonable. Has the 17ips02-2 board been tested as working? I ask this because it has come from a salvaged TV and I am just a bit concerned that if I buy the board and it too has a fault then I am in the same position and £20 out of pocket. :D
Failing that if it is a working board, do I just click on the buy me a beer icon and pledge £20?
Cheers. :)
jimca007:
Had a couple of these things stuck in standby due to the wee blue caps on the inverter output . As a check you can remove them from the circuit board and see if the set boots up if it does get replacements from either a supplier or ebay and away you go... good luck
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version