Author Topic: anyone recognise this chassis? (Read 5801 times)

dougc · « **on:** October 14, 2011,08:11:10 »

Hi, Anyone recognise attached chassis? It is in a Matsui m26dvdb19 for which I need to access service mode. Cheers, Doug

Mulja tv repair portal · « **on:** October 14, 2011,08:11:10 »

daz · « **Reply #1 on:** October 14, 2011,08:16:39 »

it looks similar to that wharfedale you had in a few days ago, perhapse hame codes?

dougc · « **Reply #2 on:** October 14, 2011,08:37:03 »

Thanks, but already tried that one!

Mulja tv repair portal · « **Reply #2 on:** October 14, 2011,08:37:03 »

watteau · « **Reply #3 on:** October 14, 2011,10:17:53 »

Hi,
It's a 'Cello' chassis, you might try: http://contrast-uk.net/cello.html,
they have a technical help, might be worth a try,
Regards,
John

dougc · « **Reply #4 on:** October 14, 2011,11:05:21 »

E-mailed Cello and apparently only Cello engineers are allowed such information!!

dougc · « **Reply #5 on:** October 16, 2011,03:39:43 »

Has anyone any info on Cello/Neon service menu?

Mulja tv repair portal · « **Reply #5 on:** October 16, 2011,03:39:43 »

AGC · « **Reply #6 on:** October 16, 2011,06:07:40 »

You can look here, or ask a question.
http://www.fixya.com/tags/matsui_tv_remote_code

astracat · « **Reply #7 on:** October 18, 2011,16:39:57 »

hi , looks similar to dmtech i repaired try display 1 1 av input
g/luck
astracats

dougc · « **Reply #8 on:** October 19, 2011,04:57:49 »

Thanks Astracats, Not that one either - really struggling on this one!! Doug.

watteau · « **Reply #9 on:** October 20, 2011,03:46:29 »

Hi,
I've seen, 'Source', 2, 5, 8, 0, suggested, but haven't tried it myself,
Regards,
John.

dougc · « **Reply #10 on:** October 20, 2011,07:13:17 »

Thanks John, Not that one either!! Doug

t1412 · « **Reply #11 on:** October 20, 2011,17:36:00 »

ok doug you still got that 17pw20 power board 4 sale thanks

shaun

dougc · « **Reply #12 on:** October 20, 2011,18:30:02 »

Hi Shaun, I'll check in the morning, Doug.

dougc · « **Reply #13 on:** October 20, 2011,18:36:07 »

Hi Shaun, Yes I still have 17pw20-1.

vicvc · « **Reply #14 on:** October 21, 2011,02:11:22 »

Looks similar to a few Chinese chassis I've had my hands on and each of them was different access due to software written for various manufactures. But it woun't hurt to try Menu 1147 or Menu 9527.Depending on your direct problem(why you want service mode), try a work-around. eg.Blanking (external) of 24c32/64 can cure a few ails on these.(remember to backup b4 blanking for in case you want to revert).

Mulja tv repair portal · « **Reply #14 on:** October 21, 2011,02:11:22 »

News:

Author Topic: anyone recognise this chassis? (Read 5801 times)

Mulja tv repair portal

Mulja tv repair portal

Mulja tv repair portal

AGC

Mulja tv repair portal